Only half the size of a hand, robust and strong as a tank but a slim 330g light. The reworked version of the well-proven lineLock-15 VA treads seamlessly into the footsteps of its predecessor.

A full 25% (100g) weight reduction, slightly reduced outside measures plus clearly better side guidance and locking effect of the webbing make it superior in all disciplines to its predecessor, that was successful worldwide with a circulation of 250 pieces.

Key features of revision:
1. better webbing guidance especially for very thick webbing.
2. better locking-effect due to steeper angle. Now even locks off Vectran webbing in single looping without any slip up to 15kN!
3. MKII.2 has highly optimized geometry to ensure very easy feeding of webbing and taking in slack, without sacrificing locking effect.

NOTE, no more dyneema slings! Now also equipped with the brand new 13cm long special sling LPS with a breaking strength of 50kN! This sling is custom designed for the slackPro! lineLock and features notably higher safety, best handling and highest possible flexibility.

...Pull bolt to the front, guide bolt head through the eyelet and slide the bolt to the side. Now the webbing can be inserted and the bolt can be locked back into place.

Because the locker bolt rotates freely, the handling and feeding through of the webbing is easy beyond compare, which ensures the best possible pretensioning by hand.

The lineLock has been constructed under the primary aspect of safety!

A safety factor of 3:1 for working load to minimum breaking strength provides for the necessary safety margin for you to rely 100% on this most important element in your ready setup longline rig!

With its highly rounded edges (see right hand pic) at exactly those locations, where the webbing touches the edges of the lineLock, it preserves and protects your precious webbing in the best possible way.

The sideplates are lasered from 4mm high grade steel plates, reworked by hand and then vibration grinded. All screws, nuts and washers are made of stainless steel.

The large 22mm middle divertor bushing is machined in a CNC turning lathe with highest precision from solid 7075-T651 aluminum rods and finished with an anodized coating for best durability and corrosion protection.
All bolts, pins and screws are made of high grade steel.

Option 1:
Fastening bolt manually removable
(Please choose when ordering)

To remove or exchange the sling quickly and easily when needed, we offer the option of a removable rear bolt with a cut-in that is secured with a spring-pin.

Option 2:
Dual Delta Link
(Please choose below)

Our newest development in lineLock fixation, the Dual Delta-Link. The LPS (sling) is replaced by two 8mm steel delta quicklinks.

Plus:
1. Moves the anchor point around 15cm nearer to the tree than with slings and shackle
2. Less parts = less risk
3. Higher breaking strength = more safety (each delta link has a breaking strength of 25kN = 50kN of combined breaking strength!)

Due to the combined breaking strength of 50kN the two Deltalinks are so strong together that there is absolutely no deformation up to 15kN load.
Therefore we guarantee, that the screw gates can ALWAYS be opened by hand after de-tensioning when used according to spec!

Weight lineLock VA MKII
with Deltalinks: 480g